Screen-printing Totally Explained

Everything about Screen Printing totally explained

Screenprinting, silkscreening, or serigraphy is a printmaking technique that creates a sharp-edged image using a stencil. A screenprint or serigraph is an image created using this technique.
It began as an industrial technology, and was adopted by American graphic art well before the 1900s. It is currently popular both in fine arts and in commercial printing, where it's commonly used to print images on T-shirts, hats, CDs, DVDs, ceramics, glass, polyethylene, polypropylene, paper, metals, and wood. The Printer's National Environmental Assistance Center says "Screen printing is arguably the most versatile of all printing processes." Since rudimentary screen-printing materials are so affordable and readily available, it has been used frequently in underground settings and subcultures, and the non-professional look of such DIY culture screen prints has become a significant cultural aesthetic seen on movie posters, record album covers, flyers, shirts, commercial fonts in advertising, and elsewhere. Graphic screenprinting is widely used today to create many mass or large batch produced graphics, such as posters or display stands. Full color prints can be created by printing in CMYK (cyan, magenta, yellow and black). Screenprinting is often preferred over other processes such as dye sublimation or inkjet printing because of its low cost and ability to print on many types of media.

Printing technique

A screen is made of a piece of porous, finely woven fabric (originally silk, but typically made of polyester since the 1940s) stretched over a frame of aluminum or wood. Areas of the screen are blocked off with a non-permeable material to form a stencil, which is a negative of the image to be printed; that is, the open spaces are where the ink will appear.
   The screen is placed atop a substrate such as papyrus or fabric. Ink is placed on top of the screen, and a fill bar (also known as a floodbar) is used to fill the mesh openings with ink. The operator begins with the fill bar at the rear of the screen and behind a reservoir of ink. The operator lifts the screen to prevent contact with the substrate and then using a slight amount of downward force pulls the fill bar to the front of the screen. This effectively fills the mesh openings with ink and moves the ink reservoir to the front of the screen. The operator then uses a squeegee (rubber blade) to move the mesh down to the substrate and pushes the squeegee to the rear of the screen. The ink that's in the mesh opening is transferred by capillary action to the substrate in a controlled and prescribed amount, for example the wet ink deposit is equal to the thickness of the stencil. As the squeegee moves toward the rear of the screen the tension of the mesh pulls the mesh up away from the substrate leaving the ink upon the substrate surface.
   There are three types of screen printing presses. The 'flat-bed' (probably the most widely used), 'cylinder', and 'rotary'.
   While the public thinks of garments in conjunction with screen printing, the technique is used on tens of thousands of items, decals, clock and watch faces, and many more products. The technique has even been adapted for more advanced uses, such as laying down conductors and resistors in multi-layer circuits using thin ceramic layers as the substrate.

Stenciling techniques

There are several ways to create a stencil for screenprinting. An early method was to create it by hand in the desired shape, either by cutting the design from a non-porous material and attaching it to the bottom of the screen, or by painting a negative image directly on the screen with a filler material which became impermeable when it dried. For a more painterly technique, the artist would choose to paint the image with drawing fluid, wait for the image to dry, and then coat the entire screen with screen filler. After the filler had dried, water was used to spray out the screen, and only the areas that were painted by the drawing fluid would wash away, leaving a stencil around it. This process enabled the artist to incorporate their hand into the process, to stay true to their drawing.
A method that has increased in popularity over the past 70 years and is tremendously popular is the photo emulsion technique:

The original image is created on a transparent overlay such as acetate or tracing paper. The image may be drawn or painted directly on the overlay, photocopied, or printed with a laser printer, as long as the areas to be inked are opaque. A black-and-white negative may also be used (projected on to the screen). However, unlike traditional platemaking, these screens are normally exposed by using film positives.
The overlay is placed over the emulsion-coated screen, and then exposed with an ultraviolet light source in the 350-420 Nanometer spectrum. Other light sources don't work well. The UV light passes through the clear areas and create a polymerization (hardening) of the emulsion.
The screen is washed off thoroughly. The areas of emulsion that were not exposed to light dissolve and wash away, leaving a negative stencil of the image on the mesh.

Photographic screens can reproduce images with a high level of detail, and can be reused for tens of thousands of copies. The ease of producing transparent overlays from any black-and-white image makes this the most convenient method for artists who are not familiar with other printmaking techniques. Artists can obtain screens, frames, emulsion, and lights separately; there are also preassembled kits, which are especially popular for printing small items such as greeting cards.
Another advantage of screen printing is that large quantities can be produced rapidly with new automatic presses. (about 800 shirts in 1 hour) (The record is over 2000 shirts an hour)

Screen print methods

Plastisol: the most common plastisol based print used in garment decoration. Good colour opacity onto dark garments and clear graphic detail with, as the name suggests, a more plasticized texture. This print can be made softer with special additives or heavier by adding extra layers of ink.

Water Based inks: these penetrate the fabric more than the plastisol inks and create a much softer feel. Ideal for printing darker inks onto lighter coloured garments. Also useful for larger area prints where texture is important.

PVC/ Phalate Free: relatively new breed of ink and printing with the benefits of plastisol but without the two main toxic components - soft feeling print.

Discharge inks: used to print lighter colours onto dark background fabrics, they work by removing the dye in the garment – this means they leave a much softer texture. They are less graphic in nature than plastisol inks, and exact colours are difficult to control, but especially good for distressed and vintage prints.

Foil: is what you'd imagine. A glue is printed onto the fabric and then foil is applied for a mirror finish.

Glitter/Shimmer: silver flakes are suspended in a plastisol ink to create this sparkle effect. Usually available in gold or silver but can be mixed to make most colours.

Metallic: similar to glitter, but smaller particles suspended in the ink. A glue is printed onto the fabric then a nanoscale fibers applied on it.

Expanding ink (puff): an additive to plastisol inks which raises the print off the garment, creating a 3D feel.

Caviar beads: again a glue is printed in the shape of the design, to which small plastic beads are then applied – works well with solid block areas creating an interesting tactile surface.

Four colour process: artwork is created using dots (CMYK) which combine to create the full spectrum of colours needed for photographic prints – this means a large number of colours can be printed using only 4 screens, making the set-up costs viable. The inks are required to blend and are more translucent, meaning a compromise with vibrancy of colour.

Gloss: a clear base laid over plastisol inks to create a shiny finish.

Nylobond: a special ink additive for printing onto technical or waterproof fabrics.

Mirrored silver: Another solvent based ink but you can almost see your face in it. Suede Ink Suede is another great ink that's easy to print and gives the image a textured leather, simulated suede look and feel. Suede is a milky colored additive (much like a plastisol base) that will work in a regular plastisol. It is actually a puff blowing agent that doesn't bubble as much as regular puff ink. With suede additive you can make any color of plastisol have a suede feel. The directions vary from manufacturer to manufacturer, but generally you can add up to 50% suede additive to your normal plastisol.

Versatility

Screenprinting is more versatile than traditional printing techniques. The surface doesn't have to be printed under pressure, unlike etching or lithography, and it doesn't have to be planar. Screenprinting inks can be used to work with a variety of materials, such as textiles, ceramics, wood, paper, glass, metal, and plastic. As a result, screen printing is used in many different industries, from clothing to product labels to circuit board printing.

Further Information

Get more info on 'Screen Printing'.

External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

<a href="http://screen-printing.totallyexplained.com">Screen-printing Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.